Loading tweets...
Tube Box SE II offers the same characteristics as the Tube Box II, but it takes the sound to a whole other level. Additional adaptation possibilities and a switchable subsonic filter make it ideal for use with high quality MM and MC cartridges. The ultimate combination of modern phono electronics and that classic ‘valve’ sound.
Key Features:
- Preamplifier for MM or MC cartridges, with switches on the rear panel
- Impedance switch for MC cartridges
- Capacitance switch for MM cartridges
- Subsonic filter switchable
- Dual-mono architecture
- Premium Röhren ECC-803 Golden Pin tubes
- EAT CoolDampers for protection against unwanted vibration
- High End Chipset for optimum sound
- Ultra low-noise semiconductors
- SMD technology
- Available in black and silver
Technical Data:
| Tubes: | 2 x ECC83 (12AX 7A) |
| Input Impedance: | MM – 120, 220, 340 and 440pf / 47kΩ MC – 17, 18, 20, 22, 69, 100 & 220Ω / 120pF |
| Output Voltage: | MM – 300mV/1kHz at 3mV/1kHz MC – 300mV/1kHz at 0.3mV/1kHz |
| Gain: | MM – 40dB MC – 60dB |
| Noise Floor: | MM – 95dB (100dB – A weighted) MC – 75dB (80dB – A weighted) |
| THD: | MM – 0.03% MC – 0.1% |
| RIAA Accuracy: | 20Hz – 20kHz / max. 0.3dB |
| Subsonic Filter: | @ 18Hz with 24dB/octave |
| Outboard PSU: | 16V / 1,000mA AC |
| Power Consumption: | 16V / 850mA AC |
| Dimensions (W x H x D): | 103 x 72 x 158mm |
| Weight: | 1,050g (without power supply) |