The original Xerxes record player, launched in 1985, was one of the most important turntables of the eighties. With advanced engineering techniques and radical solutions intended to address the inherent problems suffered by other turntables, the Xerxes offered a more enjoyable and accurate presentation of music than anything else at the time.
The Xerxes 20+ that we see before us today is the result of over 20 years of ongoing research, development and refinement of the Xerxes idea, and is a significant step towards the most advanced record player Roksan have ever produced, the TMS 3.
The elegance in engineering is visible through the compact clean lines and robust construction of the Xerxes 20+’s three plinths and triple layer isolation system. The hardened tool steel spindle, the tungsten carbide ball and the two-piece solid phosphor bronze housing, which is machined to an accuracy of 5 microns, provide the unique self-centering, self-aligning true single point main bearing.
The arm board/cut-out (which solves the inherent problems of a sprung sub-chassis and mass loaded designs) is isolated and removable improving performance and aiding set up with minimal maintenance.
The top plinth prevents any residual moror vibration from reaching the record/cartridge interface. The sub-plinth which supports the main bearing/platter assembly and the tonearm, decouples the stylus/groove interface and isolates it from external disturbances. The detachable armboard machined from a billet of acetal provides a further level of isolation with complimentary coupling between the tonearm and the sub-plinth.
The Xerxes 20+ can be fitted with any of Roksan’s three arms, or any other high quality arm, to offer a powerful and expansive sound displaying a fine mid-band, a fast and deep bass and a very smooth and open treble. Musicians are firmly located within the soundstage, with the tempo and musicality combining to create a compelling sense of live music being played.
Utilised in the Xerxes 20+ are TMS 3′s main Bearing Ball, Inner and Outer Platter design that are refined to ensure the record remains almost undisturbed by the internally induced vibrations. This provides the cartridge with an almost silent passage to retrieve the vital audio information. The combination of the Plinth material, density, linear damping, vibration absorbing weight blocks, lowered decoupling frequency and controlled harmonic structure delivers a performance second to none.
- True high-end turntable
- Built and inspired from years of ongoing development
- Three-level decoupling design allows for a beautifully smooth and silent rotation of the record
- Perfectly suited to all Roksan tonearms
- Available in three stunning finishes
Please note: this model is not supplied with a power supply, tonearm or cartridge. If you’re looking for a recommendation, please give us a call to discuss your options.
|Main Bearing Spindle:||Hardened tool steel|
|Roundess & Concentricity:||< 5 Microns|
|Length – Diameter Ratio:||11:1|
|Main Bearing Ball:||Super precision Tungsten Carbide|
|Roundness:||< 1 Micron|
|Main Bearing Housing:||Solid Phosphor Bronze|
|Inner Platter:||2 Piece Solid Aluminium alloy,
Interference fitted non-resonant
|Outer Platter:||2 Piece Solid Aluminium alloy,
Interference fitted non-resonant
|Structure:||3 Plinth Design|
|Isolation:||3 Level De-coupling|
|Motor:||Custom made 24 pole synchronous|
|Pulley:||Solid Aluminium alloy|
|Roundness & Concentricity:||< 1 Micron|
|Belt:||Precision ground Neoprene|
|Motor Mount:||Unique synchronizing bearing|
|Motor Drive:||External speed controller|
|Wow & Flutter:||< 0.02%|
|Dimensions:||450 x 370 x 115mm|